soapformulator
EN
Oils

Palm Superolein

Also: Double-fractionated palm olein.

How much lye · 1 kg · Superfat 5 %
130.4 g NaOH 182.9 g KOH 100 %

Calculate a 100 % Palm Superolein bar

Published values

Saponification value180–205 mg KOH/g
Used by the calculator192.5 mg KOH/g (midpoint)
SAP for NaOH0.1372 g/g
Iodine value≥ 60 g I₂/100 g
INS (SAP − IV)133
Melting point≤ 19.5 °C
Unsaponifiable matter≤ 1.3 %

A bar made of 100 % Palm Superolein

Hardness 39 29–54
Cleansing 1 below 12–22
Conditioning 60 44–69
Bubbly lather 1 below 14–46
Creamy lather 38 16–48

Conventional qualities summed from the fatty-acid groups; a single-oil bar is a reference point, not a recipe.

How much lye

OilNaOHKOH
500 g 65.2 g(61.0–69.4) 91.4 g(85.5–97.4)
1 kg 130.4 g(121.9–138.8) 182.9 g(171.0–194.8)
1 lb (454 g) 59.1 g(55.3–63.0) 83.0 g(77.6–88.3)
2 lb (907 g) 118.3 g(110.6–126.0) 165.9 g(155.1–176.7)

For this oil alone at 5 % superfat, with pure sodium hydroxide (NaOH) or pure potassium hydroxide (KOH); in brackets, across the published range of its saponification value. KOH is usually sold at 90 %: divide by 0.9. For a whole recipe, open the calculator.

Fatty-acid profile

Saturated : unsaturated 40 : 60

Fatty acidPublished range, %Used
Lauric acid C12:0 · saturated 0.1–0.5 0.3
Myristic acid C14:0 · saturated 0.5–1.5 1.0
Palmitic acid C16:0 · saturated 30–39 34.5
Palmitoleic acid C16:1 0–0.5 0.3
Stearic acid C18:0 · saturated 2.8–4.5 3.7
Oleic acid C18:1 43–49.5 46.3
Linoleic acid C18:2 10.5–15 12.8
α-Linolenic acid C18:3 n-3 0.2–1 0.6
Arachidic acid C20:0 · saturated 0–0.4 0.2
Gadoleic acid C20:1 0–0.2 0.1
Behenic acid C22:0 · saturated 0–0.2 0.1

Compare it with other oils

Where these numbers come from

Codex Alimentarius Commission (FAO/WHO) — CXS 210-1999 Standard for Named Vegetable Oils, print of the 2019 revision (adopted 1999; revised 2001, 2003, 2009, 2017, 2019; amended 2005, 2011, 2013, 2015, 2019) · document dated 2019 · read 2026-09-20

Verbatim mirror of the FAO file CXS_210e.pdf; the official FAO link was Cloudflare-gated at retrieval. Table 1 (Section 3.1) = mandatory GLC fatty-acid ranges, % of total fatty acids, ND = not detectable (<=0.05%). Table 2 (Appendix 'Other quality and composition factors') gives saponification value, iodine value (Wijs) and unsaponifiable matter of CRUDE oils; the Appendix is explicitly ADVISORY (a product not meeting it may still conform). This print predates the 2021-2025 amendments; the 2024 additions (avocado, camellia seed, sacha inchi, high-oleic soya bean) are not included.

Fatty acids from CXS 210 Table 1 (mandatory GLC ranges, % of total fatty acids; 'ND' = not detectable, <=0.05%, entries that are ND-only are omitted; C17:0, C17:1, C20:2, C22:2 and C24:1 columns omitted because they are outside the acids this database records). The saponification value, the iodine value and the unsaponifiable share from Appendix Table 2 (crude oils; ADVISORY, not mandatory; unsaponifiable converted from g/kg). No 'typical' values are printed in the standard, so none are given. Liquid fraction of palm oil produced by a specially controlled crystallisation to achieve an iodine value of 60 or higher (Section 2.1). Section 3.2 slip point: not more than 19.5 C.

This record is part of the open ingredient database (ODbL), which you can download as CSV or JSON. Found an error or a better primary source? Corrections with a link to the document are welcome at support@soapformulator.com.