Cottonseed Oil
INCI Gossypium Herbaceum Seed Oil. Saponified with NaOH it is listed as Sodium Cottonseedate, with KOH as Potassium Cottonseedate. CAS 8001-29-4; EC 232-280-7, as CosIng gives them. Also: Gossypium spp. seed oil, Cotton-seed oil.
Published values
| Saponification value | 189–198 mg KOH/g |
| Used by the calculator | 193.5 mg KOH/g (midpoint) |
| SAP for NaOH | 0.1379 g/g |
| Iodine value | 100–123 g I₂/100 g |
| INS (SAP − IV) | 82 |
| Melting point | — |
| Unsaponifiable matter | ≤ 1.5 % |
Soapmaking books print about 0.138 g NaOH per g (median of 6 books), which agrees with ours to within 2 %.
A bar made of 100 % Cottonseed Oil
Conventional qualities summed from the fatty-acid groups; a single-oil bar is a reference point, not a recipe.
How much lye
| Oil | NaOH | KOH |
|---|---|---|
| 500 g | 65.5 g(64.0–67.0) | 91.9 g(89.8–94.1) |
| 1 kg | 131.0 g(128.0–134.1) | 183.8 g(179.6–188.1) |
| 1 lb (454 g) | 59.4 g(58.1–60.8) | 83.4 g(81.4–85.3) |
| 2 lb (907 g) | 118.9 g(116.1–121.6) | 166.8 g(162.9–170.6) |
For this oil alone at 5 % superfat, with pure sodium hydroxide (NaOH) or pure potassium hydroxide (KOH); in brackets, across the published range of its saponification value. KOH is usually sold at 90 %: divide by 0.9. For a whole recipe, open the calculator.
Fatty-acid profile
Saturated : unsaturated 28 : 72
| Fatty acid | Published range, % | Used | |
|---|---|---|---|
| Lauric acid | C12:0 · saturated | 0–0.2 | 0.1 |
| Myristic acid | C14:0 · saturated | 0.6–1 | 0.8 |
| Palmitic acid | C16:0 · saturated | 21.4–26.4 | 23.9 |
| Palmitoleic acid | C16:1 | 0–1.2 | 0.6 |
| Stearic acid | C18:0 · saturated | 2.1–3.3 | 2.7 |
| Oleic acid | C18:1 | 14.7–21.7 | 18.2 |
| Linoleic acid | C18:2 | 46.7–58.2 | 52.5 |
| α-Linolenic acid | C18:3 n-3 | 0–0.4 | 0.2 |
| Arachidic acid | C20:0 · saturated | 0.2–0.5 | 0.4 |
| Gadoleic acid | C20:1 | 0–0.1 | 0.1 |
| Behenic acid | C22:0 · saturated | 0–0.6 | 0.3 |
| Erucic acid | C22:1 | 0–0.3 | 0.2 |
| Lignoceric acid | C24:0 · saturated | 0–0.1 | 0.1 |
Guides that discuss it
Where these numbers come from
Verbatim mirror of the FAO file CXS_210e.pdf; the official FAO link was Cloudflare-gated at retrieval. Table 1 (Section 3.1) = mandatory GLC fatty-acid ranges, % of total fatty acids, ND = not detectable (<=0.05%). Table 2 (Appendix 'Other quality and composition factors') gives saponification value, iodine value (Wijs) and unsaponifiable matter of CRUDE oils; the Appendix is explicitly ADVISORY (a product not meeting it may still conform). This print predates the 2021-2025 amendments; the 2024 additions (avocado, camellia seed, sacha inchi, high-oleic soya bean) are not included.
Fatty acids from CXS 210 Table 1 (mandatory GLC ranges, % of total fatty acids; 'ND' = not detectable, <=0.05%, entries that are ND-only are omitted; C17:0, C17:1, C20:2, C22:2 and C24:1 columns omitted because they are outside the acids this database records). The saponification value, the iodine value and the unsaponifiable share from Appendix Table 2 (crude oils; ADVISORY, not mandatory; unsaponifiable converted from g/kg). No 'typical' values are printed in the standard, so none are given. Appendix: Halphen test should be positive.
This record is part of the open ingredient database (ODbL), which you can download as CSV or JSON. Found an error or a better primary source? Corrections with a link to the document are welcome at support@soapformulator.com.