soapformulator
Deutsch
Fettsäuren

Caprinsäure

INCI-Bezeichnung: Capric Acid. Auch: Decansäure.

Seife aus 100 % Caprinsäure berechnen

Veröffentlichte Werte

Verseifungszahl322–330 mg KOH/g
Vom Rechner verwendet326.0 mg KOH/g (Mittelwert)
VZ für NaOH0.2324 g/g
Jodzahl≤ 0.5 g I₂/100 g
INS (VZ − JZ)326
Schmelzpunkt
Unverseifbare Anteile

Eine Seife aus 100 % Caprinsäure

Härte 1 unter 29–54
Reinigend 1 unter 12–22
Pflegend 0 unter 44–69
Schäumend 1 unter 14–46
Cremig 0 unter 16–48

Übliche Eigenschaften, summiert aus den Fettsäuregruppen; eine Seife aus einem einzigen Öl ist ein Bezugspunkt, kein Rezept.

Fettsäureprofil

FettsäureVeröffentlichte Spanne, %Verwendet
Capronsäure C6:0 · gesättigt ≤ 0.5 0.5
Caprylsäure C8:0 · gesättigt ≤ 1 1.0
Caprinsäure C10:0 · gesättigt ≥ 99 99.0
Laurinsäure C12:0 · gesättigt ≤ 1 1.0

Woher diese Zahlen kommen

Die mit Quellen belegten Anmerkungen unten und die Titel der zitierten Dokumente bleiben in ihrer Originalsprache. Eine übersetzte Quellenangabe lässt sich nicht nachschlagen, und eine übersetzte fachliche Zusammenfassung ist nicht mehr die Zusammenfassung, die anhand des Dokuments geprüft wurde.

Wilmar International Ltd (oleochemicals producer)CAPRIC ACID 99% (WILFARIN CA-1099) product specification page · abgerufen am 2026-09-21

Specification table on the product page: acid value 321-329, saponification value 322-330 mg KOH/g, iodine value 0.5 max, titre 30-32 C, colour 0.5/5 max (Lov R/Y); composition C6 0.5 max, C8 1 max, C10 99 min, C12 1 max, others 0.5 max; product form liquid.

Wilmar International Ltd (oleochemicals producer)Wilmar Oleochemical and Biofuel Division product brochure (Fractionated Fatty Acids table, WILFARIN CA-1099) · abgerufen am 2026-09-21

Brochure PDF (uploaded 2012), fractionated fatty acids table: AV 321-329, SAP 322-330, IV 0.5 max, titre 30-32 C, colour 0.5/5 max, C6 0.5 max, C8 1 max, C10 99 min, C12 1 max. Text extracted with pdftotext -layout; extracted rows are shifted one line against their labels and were checked against the product page.

Producer specification for Wilmar WILFARIN CA-1099 (Capric Acid 99%, from the splitting of palm and palm-kernel oil): acid value 321-329 mg KOH/g, saponification value 322-330 mg KOH/g, iodine value 0.5 max (% I2 absorbed = g/100 g), titre 30-32 C, colour 0.5/5 max (Lovibond R/Y), composition C6 0.5 % max, C8 1 % max, C10 99 % min, C12 1 % max, others 0.5 % max; supplied liquid. Free fatty acid, so one KOH per molecule and not three: 56106 / 172.26 = 325.7 mg KOH/g for the pure acid against a published band of 322-330, agreement to well under a percent. The published value is the one to use for lye calculation. Titre 30-32 C is a solidification point, not a melting point, so meltingPointC is null; C10 is solid at room temperature and melts in the hand, which is the practical difference from C8. Wilmar's oleochemical brochure repeats the same limits (additional source); its text-extracted rows sit one line off their labels, so the product page was used to fix the mapping. In soap C10 behaves like a shorter, sharper lauric: it lathers instantly and cleans hard, and past roughly 15-20 % of the fat it strips skin and softens the bar, which is why it normally appears only as the 5-10 % that comes with coconut or palm-kernel oil rather than as a neat addition. INCI is the standard entry and was not re-verified on CosIng in this session; the salt names were not established from an allowed document, so saponifiedInci is null.

Dieser Datensatz ist Teil der offenen Zutatendatenbank (ODbL). Einen Fehler oder eine bessere Primärquelle gefunden? Der Datenbestand liegt auf GitHub; Korrekturen mit Link auf das Dokument sind willkommen.